Got a new board for my CPU since the previous one was cheap and rubbish, 2 of the SATA ports were obstructed by the GPU card so I could only use 4 also the SATA ports were not 6Gbs.
The point is, this board the north bridge runs hot, very hot, too hot to touch and AMD overdrive reports temps excess of 75C if the case is closed but max 70C if its open.
I assume this is the north bridge?
What I am after is some sort of coolerI have my eye on a zalman becuase I have had a zalman CPU cooler int h past and it was great but nowhere seems to stock the one I want locally so I am open to suggestions.
The cooler I am idealy after just so you know.
My board if it helps. it is the 1.1 revision.
Results 1 to 11 of 11
Thread: Northbridge coolers
- Join Date
- Apr 2006
- Rep Power
i'll try and find some links here soon
Last edited by maltrophstitan; 03-29-2013 at 06:54.
Stupid Question but how do you know the North Bridge Temp I use Overdrive too & HW Monitor and the only temps I see are Ambient/Socket/PCB & Core temps.
But I also get different readings from HW & Overdrive as HW says my cores are @ 19c but overdrive shows them at 31c ??
The 1st 3 temps don't have names on them only TMPIN1 TMPIN2 & TMPIN3 on Overdrive but are named TMPIN 0/1/2 on HW Monitor which I assume are Ambient/Socket & PCB temp
Turns out its not the northbridge thats getting that hot. Instead its the mosfets.
I took the back off my case and could feel it wamr in that area so now for the time beign I have bodged a fan to cool them down until I get soem heatinks for those as well.
In AMD overdrive I was using the TMPIN1 tbut it could vary from board to board its still pretty hot. over 60C but at east now I cannot smell any wamr electronics whn it was in the 70s.
Someoen reccomended these for Mosfets asnd maybe even as the northbridge cooler.
I had the issue when I had an AMD system on my old AMD 945 X4 it would say 92 via HWMonitor it turns out it probably is a faulty sensor or a sensor that I dont have and its just reporting a high temp every thing was fine playing games etc never had any overheat issues
Its not a faulty sensor in my case, it is running hot, too hot to touch and I can smell warm electronics if I don't use the fan.
Just an hour ago my PC wasnt working, I was streaming a movie and ti just suddenly stopped. so I went to investigate and my PC wasnt even on. I tried switching it on and nthing happeend. Unplugged it used a differen cord and it workd, fuse I thought so tried the other cord and it worked again my guess is it was too hot so shut down and wouldnt come back up until cool enough.
Gonna send this board back later this week its too much trouble and if the heatsinks do not work I will have voided the warranty.
If that is the case then I would certainly RMA it could be a fault with the north bridge chip possibly think I had an issue like that with a old ECS motherboard for my AMD 64 system years ago
Im not sure what goes with my PC but sometimes my Temps will Jump up a lot when I don't see it even on Idle but after Googling what the TMPINS/0/1/2/3 on HWmonitor/Overdrive mean it turns out it's different for every board but im sure the readings aren't real cause The Core temps are different between Overdrive & HW Monitor
But not just that last night after playing SWTOR for about 10 hours HWmonitor had at max temp TMPIN0 @ 160c & TMPIN1 @ 129c which would mean my CPU/& Mobo would be on Fire so im getting false readings from somewhere plus I have my BIOS to warn me if my CPU hits 70c anyways which it has never done.
So ive been Running PRIME95 Torture test for over 2 hours so far and heres where my temps are at so far (see the 86c @ TMPIN0 & notice the Difference in Core temps between programs)
EDIT sry i'll try re-size the pic now also can't remove the other pic for some reason PSU just shows black screen on Attachment Managment
John25 likes this post
Thanks for info fella but was getting errors trying to upload it via PSU, Anyways I lost last pic due to Waterfox Freezing so Just ran PRIME 95 again Torture test (1 hour so far)
see how it's given me a reading this time of 86c on TMPIN1 on last pic it had 86c on TMPIN0 & a high number on TMPIN2 & look at that fan speed at Max lol seroiusly doubt 120mm fans can output anywhere near a RPM of 333,000+rpm
Anyways I think that TMPIN2 is the actual core temps as it's consistant with the Overdrive Temps but if thats the Case then what are the Temps that HW Monitor is showing on each core (also shows same temp on Win7 CPU Widget) ??
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)