Guide How To Fix PS5 Error Code WV-109146-1 PS5 PS5 Error Code WV-109146-1 PS5 WV-109146-1 Sony WV-109146-1

Guide: PS5 Error Code WV-109146-1, How To Fix

How To Fix PS5 Error Code WV-109146-1, PS5 Error Code WV-109146-1, PS5 WV-109146-1, WV-109146-1. This PS5 error is yet another one that returns the ‘Unable to connect to the server’ message, and yet again, the steps to fix the problem are identical to a number of other problems with the console. Sony‘s official website entry recommends a number of steps you can take to fix the issue, as seen below.

PS5 Error Code WV-109146-1, How To Fix

  1. Hit up the PSN Status Page to see if there is any problem outlined by Sony
  2. Restart the PS5 and used a wired connection to access the Internet, then configure your settings again
  3. If using a wireless connection, review your installation location and bring the PS5 closer to your router if possible. You can also try moving any obstacles that may disrupt the connection.
  4. Turn off your router/modem, wait five minutes, then turn it back on again.
  5. Update your router’s firmware if applicable
  6. Try opening the following ports — TCP: 80, 443, 3478, 3480, and UDP: 3478, 34709 and 49152~65535
  7. Head to networks settings and set up a static IP address to help improve it
  8. Go to DNS settings in the Network Settings and configure your settings with the number of public DNS that is free and open to the public by companies or organisations.

Related Content – Sony PS5 Complete Guide – A Total Resource On PlayStation 5